Downloads

Full Download

1. Plug in power and internet cable into the yellow port (do not connect PIN pad)
2. Select “4” and “Enter” (green button) at the same time
3. Enter Password 990712
4. Select Exit to OS > Password 990712
5. Select Setup > Enter Password>Erase
6. Select Download>Port>IP>Enter>Save 
7. Select File
8. Enter TID =  (contact Client Services to obtain number), then select Save & Enter
9. Then select Run and the download will begin
10. Download is complete once terminal states Transmission Complete
11. Hit the Red button 2 times then unplug the terminal, wait about 10 seconds and plug it back in, with the PIN pad now plugged in
12. The terminal will run the reboot and should pull a table load, if it does not, follow the steps below on how to pull a table load
13. Terminal is ready to process

Table Load

1. Select the orange wrench on the upper right corner
2. Select Settings > Credit > Parameters > Parm INIT > Table Load